IDIOMA  
MIEMBROS
¿Olvidó su clave?
¿AúN NO ESTá REGISTRADO?
¿QUé PUEDO HACER?
- Agregar un modelo a mi Showroom (necesita Identificarse o Registrarse)

- Ver mis Showrooms Favoritos

- Buscar Showrooms de otros miembros

- Conocer otros miembros de la Comunidad

- Navegar nuestros Foros

HOY EN MODELERSITE.COM
Ver más >>
MODELER SITE - LA REVISTA

 
CORREO
Si quiere recibir noticias acerca de las actualizaciones, por favor agregue su email a la lista.
ENVIE SU E-MAIL
  TéCNICAS
>> Algunos trucos
>> Aplicando calcas
>> Blindados: Técnica de la sal
>> Como construir modelo de auto con las puertas abiertas
>> Cómo se construye un modelo
>> Confección de una lona para vehículos militares
>> Construyendo cascos en "scratch"
>> Construyendo a kit Vacu en 1/48
>> Desgastes con la técnica de la esponja
>> Detallando amortiguadores en motos escala 1/12
>> El "Weathering"
>> Ensuciado usando pigmentos paso a paso
>> Equivalencias de colores de competición para pinturas Tamiya
>> Las cadenas en los T55
>> Modelado de un busto, Paso a paso
>> Pintando caras con acrílicos
>> Pintando con lacas automotivas
>> Pintando ruedas en 5 pasos
>> Pintando una figura paso a paso
>> Pintar ¿es la clave del modelismo estático?
>> Realizando pintura saltada
>> Realizando terminaciones oxidadas en vehículos militares
>> Ruedas!
>> T-34/76 Round up de kits 1/35, todas las versiones
>> Tabla de conversión de Tamiya a Humbrol y FS
>> Trabajando con Alclad2
>> Trucos para desgastes para modelistas novicios
>> Utilizando la masilla: una guía para novicios

Esta página incluso todo el arte gráfico es propiedad registrada 2006/2010 - Sitemap
 
Blindados  Fórmula uno  Autos  Motos  Aviones  Otros 
 

aklein Showroom Favoritos Identificarse Registrarse
 

Making rust in a Pocher Rolls Royce motor

Kit / Modelo  

Rolls Royce Sedanca coupe

Fabricante  

pocher

Código de Producto  

K72

Escala  

1/8

Descripción  

For the procedure

I make the parts like normal parts

For this example (exhaust)
I used grey primer tamiya
Alclad jet exhaust two coats
To obtain a real metal part

Two solutions in the rust set
1) grey heavy mixture with real metallic parts
2) clear blue solution (mixing of alcohol and water)for chemical reaction

I used the first grey solution with airbrush or aerograph
In this case I have to mix it with water and used large nozzle because metal
particles are very thick
These metal particles must have a chemical reaction with blue alcolohic
solution
It's a real oxidation like real rust (iron oxidation)
That's the reason it's so realistic
And it's funny it's almost the same smell
Like an old metal coin

This blue solution must be applied after 24 hours

I make some pictures of different steps
I send all
I tried also on black exhaust
Let me know what you think

URL Relacionada  

http://www.modernoptions.com/

URL Relacionada  

Tipo de sujeto  

Autos

Estado  

Terminado

Envíe un E-mail al miembro  

Solo para miembros

Vistas  

13148

Facebook  


Dejar un comentario
Solo para miembros registrados
 
 
 
 
 
 
 
 
 
 
 

Comentarios para este showroom

por: Axel Klein (aklein) en 2008-08-17 - 13:19

I like "happy accident" in modelism
yesterday I placed the model outside because too much terpentine smelling after weathering
(I tried to make dirty grease under the car)
dew observed in the morning
after evaporation some white chemicals reaction like one more oxidation on rust parts
good effect
I will try your technic
all modelers have some nightmare with cyanoacrylate evaporation!!!!
thanks for your comment

por: Roger Knight (roger) en 2008-08-17 - 12:48

this, when it works looks real....

Spray 'Humbrol metal cote' onto the exhaust, and polish in the normal way then pore 'super glue ' cyanoacrylate' in a dish or similar...place the exhaust very close to the super glue (not touching it) and the heat (chemical reaction) from the cyan glue as it cures somehow heats the 'metal cote' and actually 'blues' the paint in a perfect way. I discovered this by a happy accident ... try it on some scrap.. control it and it is better than any paints

por: Axel Klein (aklein) en 2008-08-17 - 12:08

for bluing I use alclad color chrome
and after I use alclad clear blue, orange and red
very lights coats until I am satisfied
but it's not always the case

por: Roger Knight (roger) en 2008-08-17 - 09:35

That looks awesome!

I always use real rust scraped from a piece of rusty old iron and then grind it in a pestle and mortar until its the same consistency as talcum powder then rub it into a matt surface. The downside if this is you cant handle it much once its finished, your technique is much more impressive!

Now, at the risk if starting a forum next to your model pictures...

What's the best way to replicate 'bluing' on an exhaust pipe? Painting is about as realistic as Harry Potter?