IDIOMA  
MIEMBROS
¿Olvidó su clave?
¿AúN NO ESTá REGISTRADO?
¿QUé PUEDO HACER?
- Agregar un modelo a mi Showroom (necesita Identificarse o Registrarse)

- Ver mis Showrooms Favoritos

- Buscar Showrooms de otros miembros

- Conocer otros miembros de la Comunidad

- Navegar nuestros Foros

HOY EN MODELERSITE.COM
Ver más >>
MODELER SITE - LA REVISTA

 
CORREO
Si quiere recibir noticias acerca de las actualizaciones, por favor agregue su email a la lista.
ENVIE SU E-MAIL
  TéCNICAS
>> Algunos trucos
>> Aplicando calcas
>> Blindados: Técnica de la sal
>> Como construir modelo de auto con las puertas abiertas
>> Cómo se construye un modelo
>> Confección de una lona para vehículos militares
>> Construyendo cascos en "scratch"
>> Construyendo a kit Vacu en 1/48
>> Desgastes con la técnica de la esponja
>> Detallando amortiguadores en motos escala 1/12
>> El "Weathering"
>> Ensuciado usando pigmentos paso a paso
>> Equivalencias de colores de competición para pinturas Tamiya
>> Las cadenas en los T55
>> Modelado de un busto, Paso a paso
>> Pintando caras con acrílicos
>> Pintando con lacas automotivas
>> Pintando ruedas en 5 pasos
>> Pintando una figura paso a paso
>> Pintar ¿es la clave del modelismo estático?
>> Realizando pintura saltada
>> Realizando terminaciones oxidadas en vehículos militares
>> Ruedas!
>> T-34/76 Round up de kits 1/35, todas las versiones
>> Tabla de conversión de Tamiya a Humbrol y FS
>> Trabajando con Alclad2
>> Trucos para desgastes para modelistas novicios
>> Utilizando la masilla: una guía para novicios

Esta página incluso todo el arte gráfico es propiedad registrada 2006/2010 - Sitemap
 
Blindados  Fórmula uno  Autos  Motos  Aviones  Otros 
 

Scale-Master Showroom Favoritos Identificarse Registrarse
 

Another Super Seven (Part 10)

Kit / Modelo  

Seven Based Custom

Fabricante  

Scratch

Código de Producto  

Scratchbuilt Seven

Escala  

1/12

Descripción  

This will be the master for the Webers. The body is made from bronze I acquired from the Indiana Jones ride at Disneyland. A friend who worked there gave me a set of used pick up shoes (think giant slot car).

I machined the body to accept the venturi tubes; they are pieces of brass tubing. Soldering the bronze to the brass turned to be more difficult than I expected, and it doesn’t have much strength for hard edges either. It seems to be a porous and dirty metal, maybe from its previous life…?

URL Relacionada  

URL Relacionada  

Tipo de sujeto  

Autos

Estado  

En construcción

Envíe un E-mail al miembro  

Solo para miembros

Vistas  

8711

Facebook  


Dejar un comentario
Solo para miembros registrados
Start of Weber carb master in bronze and brass.
Next I added the bowl to it. Since the bronze needed far more heat to fuse other parts to it using solder than the brass, I opted to use styrene for these parts.
Looks kind of like Wall-E…
This is the start of the top of the carb.
The base flanges have been added, they are made from acid cut brass from artwork I drew.
I also added the intake side flanges.
This is the beginning of the intake manifold. It is all brass soldered together. Mounting surfaces are acid cut and the tubes are just K&S stock cut and machined to fit.
This is the carb master and manifold dry fitted to the head.
I am close to being done with the master for the Weber carbs. There’s about 60 pieces to make this part, maybe a few more… The hardware will machined for each individual carb after I cast copies.