IDIOMA  
MIEMBROS
¿Olvidó su clave?
¿AúN NO ESTá REGISTRADO?
¿QUé PUEDO HACER?
- Agregar un modelo a mi Showroom (necesita Identificarse o Registrarse)

- Ver mis Showrooms Favoritos

- Buscar Showrooms de otros miembros

- Conocer otros miembros de la Comunidad

- Navegar nuestros Foros

HOY EN MODELERSITE.COM
Ver más >>
MODELER SITE - LA REVISTA

 
CORREO
Si quiere recibir noticias acerca de las actualizaciones, por favor agregue su email a la lista.
ENVIE SU E-MAIL
  TéCNICAS
>> Algunos trucos
>> Aplicando calcas
>> Blindados: Técnica de la sal
>> Como construir modelo de auto con las puertas abiertas
>> Cómo se construye un modelo
>> Confección de una lona para vehículos militares
>> Construyendo cascos en "scratch"
>> Construyendo a kit Vacu en 1/48
>> Desgastes con la técnica de la esponja
>> Detallando amortiguadores en motos escala 1/12
>> El "Weathering"
>> Ensuciado usando pigmentos paso a paso
>> Equivalencias de colores de competición para pinturas Tamiya
>> Las cadenas en los T55
>> Modelado de un busto, Paso a paso
>> Pintando caras con acrílicos
>> Pintando con lacas automotivas
>> Pintando ruedas en 5 pasos
>> Pintando una figura paso a paso
>> Pintar ¿es la clave del modelismo estático?
>> Realizando pintura saltada
>> Realizando terminaciones oxidadas en vehículos militares
>> Ruedas!
>> T-34/76 Round up de kits 1/35, todas las versiones
>> Tabla de conversión de Tamiya a Humbrol y FS
>> Trabajando con Alclad2
>> Trucos para desgastes para modelistas novicios
>> Utilizando la masilla: una guía para novicios

Esta página incluso todo el arte gráfico es propiedad registrada 2006/2010 - Sitemap
 
Blindados  Fórmula uno  Autos  Motos  Aviones  Otros 
 

Scale-Master Showroom Favoritos Identificarse Registrarse
 

Another Super Seven (Part 3)

Kit / Modelo  

Seven Based Custom

Fabricante  

Scratch

Código de Producto  

Scratchbuilt Seven

Escala  

1/12

Descripción  

Since I still had the measurements for the wheel handy, I decided to make the rotors and hubs.


I decided to experiment with another approach to the wheels and took a run at making etch cut brass wheels. This time I chose a BBS style.

URL Relacionada  

URL Relacionada  

Tipo de sujeto  

Autos

Estado  

En construcción

Envíe un E-mail al miembro  

Solo para miembros

Vistas  

5971

Facebook  


Dejar un comentario
Solo para miembros registrados
These are made to fit on the front, they’re directional too… Yes, the holes in the hubs are threaded to accept studs/bolts.
These are the rear brake rotors and hubs… Same basic process as the fronts, but not the same hub proportions.
Here is the spider I designed and cut from .030 brass.
Then I bent it using sockets for dies. Also shown is the outer rim I cut for it
Then I soldered the two parts together…
Here it is in the aluminum rim blank I made earlier with an extra tire.
I added some more pieces, nine to be exact, but they are just various sizes of brass tubing stock I soldered in to make the hub with the lug seats. This now bolts to the hubs I made earlier.
Still cleaning up the edges of the spokes and anything else that needs it.